EV Charger Installation in Aurora

Quotes from reviewed local contractors - compare and choose
Reviewed Ontario contractors
Free for homeowners, no obligation

Get Free Quotes in Aurora

EV charger installation in Aurora - whether a Level 2 (240V) home charger, a dedicated EVSE circuit, or a panel upgrade to support charging load - requires an ESA permit filed by a licensed electrical contractor. Aurora is served by Alectra Utilities, and any service upgrade required to support a higher-amperage charger must be coordinated with Alectra for meter modification or service entrance work. The Town of Aurora's Building Division issues building permits for panel replacements and service upgrades that accompany charger installations. Aurora's housing stock creates a wide range of installation scopes depending on era of construction: Heritage District homes along Yonge Street and Wellington Street from the late 1800s through the 1930s often have 60-amp or smaller service panels requiring full replacement before any Level 2 charger can be safely installed; Aurora Highlands and central Aurora homes from the 1960s and 1970s typically have 100-amp panels that may require upgrading to 200A before adding a 40 - 50A charger circuit without overloading the service; Bayview Wellington and Aurora Promenade properties from the 1980s and 1990s often have 100- to 200-amp services where a load calculation will determine whether a panel upgrade is needed; and newer Aurora Grove and Bayview Northeast homes from the 2000s onward generally have 200-amp panels with room to add a Level 2 charger circuit with proper load management. ESA-licensed electricians are required for this work; we connect you with local electricians.

How to Hire an EV Charger Electrician in Aurora

Describe your charging setup
Tell us your EV make and model, your Aurora neighbourhood or FSA (L4G), your home's age and panel amperage if known, and whether the charger will be in a garage, carport, or outdoor location.
Receive three matched quotes
Reviewed local contractors will reach out to you with quotes.
Verify ESA licence and WSIB
Confirm each electrician's ESA contractor licence number at esasafe.com and request a WSIB clearance certificate. Ask whether a panel upgrade is included in the quote if your home is pre-1990.
Confirm permit responsibility and Alectra coordination
Your electrician must pull the ESA permit and any required Town of Aurora building permit for panel work. For service entrance upgrades, confirm they will coordinate the process with Alectra Utilities. Get permit responsibility, equipment warranty, and installation timeline in writing before signing.

Frequently Asked Questions

Do I need a permit to install an EV charger in Aurora?

Yes. EV charger installation in Aurora requires an ESA permit filed by a licensed electrical contractor. If the installation also requires a panel upgrade or service entrance modification, a Town of Aurora building permit is additionally required. Never hire an electrician who suggests skipping the ESA permit for a Level 2 charger installation - unpermitted EV charger wiring is a fire risk and may void your home insurance.

Does my Aurora home have enough panel capacity for an EV charger?

It depends on your home's age. Newer Aurora Grove and Bayview Northeast homes generally have 200-amp panels with capacity to add a 40 - 50A Level 2 charger circuit after a load calculation review. Bayview Wellington and Aurora Promenade homes from the 1980s and 1990s vary - some have 200A and some have 100A panels; a load calculation is essential. Aurora Highlands and older central Aurora homes from the 1960s and 1970s frequently have 100-amp panels that should be upgraded to 200A. Heritage District homes may have 60-amp or smaller services requiring full replacement. Have your electrician complete a load calculation before committing to a charger amperage and EVSE model.

Can I use a smart load management system instead of upgrading my panel?

In some cases, yes. Smart load management devices - which automatically reduce EV charging current when household demand is high - can allow a Level 2 charger to operate safely on a 100-amp service without a full panel upgrade, provided a load calculation confirms available capacity. This is a useful option for Aurora Highlands or older Aurora Promenade homeowners looking to defer panel upgrade costs. Your electrician should assess the specific panel, existing load profile, and charger model before recommending this approach.

What certifications should an Aurora EV charger electrician hold?

Look for a 309A or 309C Certificate of Qualification from the Ontario College of Trades, current WSIB clearance, and a minimum $2M general liability policy. Verify the ESA contractor licence at esasafe.com. Ask whether the electrician has direct experience with EV charger load calculations and Alectra Utilities' service upgrade process for Aurora properties.

Sources

Electrical Safety Authority - Ontario Permit Portal
EV charger installation in Aurora requires an ESA permit filed by a licensed electrical contractor; the permit covers the charger circuit, any panel work, and the EVSE installation
Town of Aurora - Building Permits
Panel replacements and service upgrades associated with EV charger installations in Aurora require a Town of Aurora building permit in addition to the ESA permit
Alectra Utilities - Electricity Distribution
Alectra Utilities is the licensed electricity distributor serving Aurora; service entrance upgrades and new meter connections required for higher-amperage EV charger installations must be coordinated with Alectra prior to ESA inspection